Electrovaya SC800 Bedienungsanleitung PDF herunterladen (Seite 30)

• Red means the battery is charging from the AC adapter.

• Flashing red means the battery charge is low and it is time to recharge

the battery by plugging in the AC adapter.

When the battery indicator light flashes, less than half an hour of battery power

remains. Plug the AC adapter into the Scribbler to charge the battery. It will

take approximately 5 hours to fully charge your battery from empty if the

Scribbler is turned off or in standby and about 6 to 8 hours if the Scribbler is on

and running.

You can get a more precise measure of the battery remaining capacity by

selecting the power icon on the system taskbar (lower right on the screen) and

then selecting the Power Meter tab on the window that appears. If the icon is

not present, use the Start menu (lower left), then Control Panel, then

Performance and maintenance, and finally Power Options. The battery

status and precise charge level present themselves. This charge level indication

(fuel gage) is equipped with automatic recalibration – a Scribbler exclusive

feature. This recalibration occurs when the Scribbler is not running (off or in

standby) and the battery is not charging. If you leave the Scribbler off and

unplugged for a while, the fuel gage will automatically recalibrate.

3.8 Adjust the Screen Brightness

You can adjust the screen brightness of your Scribbler if you wish. You can set

brightness levels for when the Scribbler is operating under battery power and for

when the AC adapter is plugged in. This is a power-saving feature – the screen

backlight can use quite a bit of power. These two levels can be reset easily to

accommodate different ambient light conditions:

• Select Tablet and Pen Settings from the Start menu / Control Panel

/ Printers and other hardware or from the pen-and-paper icon on the

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 58 59

Keine Kommentare

Electrovaya SC800 Bedienungsanleitung Seite 30